Subaru Dashboard Warning Lights and Symbols

 

You're driving along, minding your own business, when all of a sudden a light on your Subaru's dashboard starts flashing. What does it mean? Don't worry, we're here to help! In this article, we'll go over some of the most common dashboard warning lights and symbols so that you can be prepared for whatever comes your way.

Subaru Exterior Light Fault

If your Subaru starts to experience any issues with its exterior lights, there could be a problem with the wiring or a bulb may have burned out. To help you troubleshoot the issue, here is a guide to the different Subaru dashboard warning lights and symbols.

First, take a look at the symbol that is illuminated on your dashboard. If it is a light bulb with jagged lines running through it, this means that one of your bulbs has burned out and will need to be replaced. If you see this symbol, pull over as soon as possible and replace the affected bulb.

If the symbol on your dashboard looks like a wire with jagged lines running through it, this means that there is an issue with the wiring of your exterior lights. This is a more serious problem and you should take your vehicle to a qualified mechanic to have it repaired.

Finally, if the symbol on your dashboard is simply a light bulb, this means that your exterior lights are turned on. This is not necessarily a problem, but you should check to make sure that all of your bulbs are functioning properly before heading out on the road.

Subaru Suspension Control Warning Light

If you see the suspension control warning light on your Subaru's dashboard, it means that there is a problem with the vehicle's suspension system. This could be due to a variety of issues, so it's important to have the car checked out by a professional as soon as possible. In the meantime, try to avoid driving on rough roads or over speed bumps.

Subaru Immobilizer Warning Light

If your Subaru has an immobilizer warning light on the dashboard, it means that there is a problem with the vehicle's anti-theft system. This system is designed to prevent the engine from being started without the key, so if it's not working properly, it could mean that your car is vulnerable to theft.

If you see this warning light, you should take your car to a Subaru dealership or an authorized repair shop to have the problem diagnosed and repaired. In the meantime, you should avoid leaving your car unattended in areas where it could be easily stolen.

Subaru ETC Warning Light

If you see the Subaru ETC warning light on your dashboard, it means that there is a problem with your electronic throttle control system. This system is responsible for controlling the engine's throttle based on input from the gas pedal. When there is a problem with this system, it can cause the engine to run erratically or even stall.

If you see this warning light, it's important to take your car to a qualified mechanic as soon as possible to have the problem diagnosed and repaired. In the meantime, try to avoid hard acceleration and sudden stops to help minimize the risk of further damage to your engine.

Subaru Automatic Start/Stop Warning Light

If your Subaru has the automatic start/stop feature, you may see a warning light on the dashboard that looks like a car with a line through it. This is the automatic start/stop warning light, and it comes on when the system is disabled.

If you see this warning light, it means that the automatic start/stop feature is not working. This may be due to a problem with the battery, so it's important to have the vehicle checked by a professional as soon as possible. In the meantime, you can disable the automatic start/stop feature by pressing and holding the button on the dash for three seconds.

Subaru Blind Spot Warning Light

The Subaru Blind Spot Warning Light is located on the side mirrors. When it is lit, it means that there is a vehicle in your blind spot. This is a safety feature that helps to prevent accidents.

Subaru Low Washer Fluid Warning Light

If this warning light comes on in your Subaru, it means that the washer fluid level in the reservoir is low. Add washer fluid to the reservoir as soon as possible. If you don't, your windshield won't get as clean when you use the wipers, and you could end up with a dirty or even cracked windshield.

If you see a warning light on your Subaru dashboard, don't panic! In most cases, the light is simply indicating that something needs to be checked or serviced. However, if the light is red or flashing, it indicates a more serious issue that should be addressed immediately. Use this guide to decode Subaru's dashboard warning lights and take care of any potential problems before they become major issues.